Installation instructions – Davey SCMax 77 ECOMATIC Salt Water Pool Sanitizing System User Manual

Page 5

Advertising
background image

5

Installation Instructions

This system is not intended for outdoor installation. If a pump/filter room is not available, a shelter providing shade
and weather protection will be necessary. Please note that the installation area should be well ventilated and free of
substances that cause corrosion.

Installation must be done in accordance with any local regulations.
When deciding on the position of the unit, take care to allow for the cable lengths available. The power supply and
electrolytic cell are very heavy, allow for this during installation. If any components are dropped, damage will occur.
The electrolytic cell can be plumbed in using 3” (80mm) or 2” (50mm) Imperial size PVC pressure pipe.

Power Supply
The power supply box should be wall mounted using the brackets provided which are designed for masonry bolts/wall
plugs. The brackets provide a gap between the back of the unit and the wall for sufficient air flow. The unit can be lifted on
and off the brackets. Instructions for the mounting brackets are inside the bracket package.
The power supply box should be mounted approximately 4ft - 5ft above ground level.

NOTE: The unit is heavy – Approx. 37.5 lbs (17 kg). Please allow for this when installing.

Advertising
This manual is related to the following products: