Sp500 spa pool controllers user guide – Davey SP500 Series SPAPOWER CONTROLLERS User Manual

Page 2

Advertising
background image

SP500 Spa Pool

Controllers User Guide

WARNING:

Before using ensure that the spa pool has been connected to a suitable weather protected

outlet socket, equipped with a double pole isolating switch, which is of the correct rating and complies with the

local wiring regulations.
When installing, refer to your local wiring code. In particular refer to ECP2 & ECP25 (AS/NZ) and EN60364-

4-1 & EN60364-7-1 (EU). The system must be installed in such a way that live parts are not accessible by

a person in the pool. If a supply cord is not fitted the system must be permanently connected to fixed wiring

through a 30mA or less RCD.
It is recommended that the steel reinforcing in any concrete base on which the pool is sitting be equipotential

bonded to the earth conductor in the supply to the spa. This is to protect against the possibility of low voltage

shocks caused by differential earth voltages. Refer to AS/NZS3000:2000 Sections 5.8 & 7.2 or EN 60364.

WARNING:

This appliance is not intended for use by young children or infirm persons without supervision.

Young children should be supervised to ensure they do not play with the appliance.

WARNING:

This product must be covered by an enclosure to prevent water ingress.

If the supply cord is damaged, it must be replaced by Davey, a Davey service agent, or a

similarly qualified person in order to avoid a hazard.

Advertising