Elitegroup VX900-I (V1.0A) - Manual (Page 34)

Chapter 3
VX900-I USER MANUAL
30
Advanced Chipset Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Chipset Setup
DRAM Frequency Auto
Bank Interleave SPD
Share Memory Auto Detection Auto
Share Memory Size 128MB
Select Display Device Control Auto
Panel Type 02
LCD Back Light control Level 5
HPET Enabled
Help Item
Auto
400 MHz
533 MHz
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto
and we recommend users leave the setting unchanged. Modify it at will may cause
the system to be unstable.
Options
: Move F10: Save ESC: Exit Enter : Select +/-/: Value
F9: Load Default Settings F1: General Help
Share Memory Size (128MB)
This item displays the VGA Share Memory Value.
Select Display Device Control (Auto)
This item enables user to see the display device which he select.
Share Memory Auto Detection (Auto)
Disable this item to set the Share Memory Size. And if the item is set to Auto, Share
Memory Size can be controlled according to the dram size. When the dram size is
less than 512 MB, Share Memory Size should be set to 64 MB. While between 512 MB
and 1 GB, it should be set to 128 MB. When more than 1 GB, it should be set to 256
MB.
Bank Interleave (SPD)
Enable this item to increase DRAM memory speed. When enabled, separate
memory banks are set for odd and even addresses and the next byte of memory
can be accessed while the current byte is being refreshed.
Panel Type (02)
This item enables user to select the Panel Type.
LCD Back Light control (level 5)
This item enables you to control the backlight brightness of the LCD.
HPET (Enabled)
This item enables or disables HPET (High Precision Event Timer) support.
Press <Esc> to return to the main menu setting page.
If the motherboard does not have the LVDS header, these items (“Select Dis-
play Device Control”, “Panel Type”, and “LCD Back Light control”) will hide
in BIOS. Please take the actual BIOS for the standard.