Elitegroup A990FXM-A (V1.1) - Manual (Page 38)

Chapter 3
A990FXM-A USER MANUAL
34
USB Configuration
Scroll to this item and press <Enter> to view the following screen:
All USB Devices (Enabled)
Use this item to enable or disable all USB devices.
USB 3.0 Support (Enabled)
Use this item to enable or disable USB 3.0 controller. We recommand users keep the
default value. Disabling it might cause the USB devices not to work properly.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Audio
allows the system to detect the presence of the USB device at startup. If detected,
the USB controller legacy mode is enabled. If no USB device is detected, the legacy
USB support is disabled.
Press <Esc> to return to the Advanced Menu page.
USB Configuration
All USB Devices [Enabled]
USB 3.0 Support [Enabled]
Legacy USB Support [Enabled]
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset M.I.B X Boot Security Save & Exit
+/- : Change Opt.
Enter : Select
F1:General Help
:Select Screen
:Select Item
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Enabled/Disabled All USB
Devices