Elitegroup B85H3-M6 (V1.0) - Manual (Page 36)

B85H3-M6 USER MANUAL
32
Chapter 3
USB Beep Message (Disabled)
This item disables/enables the beep during USB device enumeration.
Press <Esc> to return to the Advanced Menu page.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Miscellaneous
Scroll to this item and press <Enter> to view the following screen:
AHCI Port1~5
This motherboard supports five SATA channels and each channel allows one SATA
device to be installed. Use these items to configure each device on the IDE channel.
BIOS Setup Utility
AHCI Port1: Not Present
AHCI Port2: Not Present
AHCI Port3: Not Present
AHCI Port4: Not Present
AHCI Port5: Not Present
Spread Spectrum [Enabled]
Processor Multiplier 20
Bootup Num-lock [On]
USB Beep Message [Disabled]
AHCI Port1
Main Advanced Power Authentication Security Boot Options Exit
Processor Multiplier (20)
This item shows the information of the processor multiplier.
Spread Spectrum (Enabled)
Use this item to enable or disable system Spread Spectrum function, EMI (Electro-
Magnetic Interface) will reduce if this item is enabled.
Version 2.15.1236. Copyright (C) 2002-2013 American Megatrends, Inc.
Bootup Num-Lock (On)
This item determines if the Num Lock key is active or inactive at system start-up
time.
+/-/Spacebar : Change Opt.
Enter : Select
F1: General Help
:Move
F2: Previous Values
F3: Optimized Defaults
F4: Save and Exit
ESC: Discard changes and Exit
Setup