Elitegroup H81H3-M3 (V1.0) - Manual (Page 44)

H81H3-M3 USER MANUAL
40
Chapter 3
Trusted Computing
Scroll to this item and press <Enter> to view the following screen.
TPM Support (Enabled)
This item enables or disables TPM support.
Current Status Information
This item shows the information of current TPM status.
Main Advanced Chipset M.I.B. III Boot Security Exit
+/- : Change Opt.
Enter/Dbl Click : Select
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Enables or Disables BIOS
support for security device.
O.S. will not show Security
Device. TCG EFI protocol
and INTIA interface will not
be available.
Configuration
TPM Support
Enabled
TPM State Enabled
Pending operation None
Current Status Information
TPM Enabled Status:
Enabled
TPM Active Status: Activated
TPM Owner Status: Owned
TPM State (Enabled)
Pending operation (None)
TPM Enabled Status (Enabled)
TPM Active Status (Activated)
TPM Owner Status (Owned)
Enable/Disable Security Device. NOTE: Your Computer will reboot during restart in
order to change State of the Device.
Schedule an Operation for the Security Device. NOTE: Your Computer will reboot
during restart in order to change State of Security Device.
Provides the current Capability state of the security device.
Provides the current Capability state of the security device
Provides current Ownership state. ie: Owned or Unowned.