Nilfisk-ALTO BSG81 - Manual (Page 4)

7 6
Starting up
Insert the suction hose connector into the suction
opening until it engages.
You must ensure that the plug-in part of the suction
hose connector is inserted into the appliance socket.
Push the handle into the incord telescopic tube until it
engages.
Push the incord telescopic tube into the electric brush
connection piece until it engages.
You must ensure that the plug-in part of the incord
telescopic tube is inserted into the corresponding
recess on the electric brush connection piece.
An electrical contact with the vacuum cleaner is
established when the plug-in part is engaged.
To adjust the length of the incord telescopic tube,
press the sliding lock in the direction of the arrow and
adjust the tube to the required length.
1 Ergoplus handle with integral accessory
holder
2 4-in-1 accessory tool
3 Suction hose
4 ON/OFF button
5 Power indicator*
6 Change dust bag indicator
7 Exhaust grille latch
8 Exhaust filter
9 Parking aid (with automatic OFF*)
10 Suction adjustment
11 Dust compartment cover
12 Exhaust grille
13 Power cord
14 Dust container or alternatively
15 MEGAfilt ® SuperTEX dust bag
16 Parking aid (on unit underside)
17 Filter bracket
18 Motor protection filter
19 Dust compartment latch
20 Electric brush with snap connector
21 Socket for electric brush
22 Incord telescopic tube
23 Electric brush 0n/off button
* depending on design
20
22
21
23
2 1
18 19 17 16
7
9*
10
13
12
14
3
4
5*
6
8
15
11