Elitegroup H81H3-A3 (V1.0) - Manual (Page 75)

71
H81H3-A3 USER MANUAL
Chapter 5
Chapter 5
AMD CrossFireX TM Technology Support
This motherboard supports the AMD CrossFireX TM Technology that allows you to in-
stall multi-graphics processing units (GPU) graphics cards. Follow the installation
procedures in this section.
Requirements
1 Two identical CrossFireX TM ready graphic cards are needed for the setup
of 2-way CrossFireX TM configuration.
2 You would need one CrossfireX TM bridge cable.
3 Make sure that your graphics card driver supports the AMD CrossFireX TM
technology. Download the latest driver from the AMD website
(www.amd.com).
4 Make sure that your power supply unit (PSU) can provide at least the mini-
mum power required by your system.
Installing CrossFireX TM graphics cards
1. Insert the CrossFireX TM graphics cards into the PCIEX16/PCIEX16_S slots. Make
sure that the card is properly seated on the slot.
* For reference only
3. Connect an auxiliary power source from the power supply to the graphics cards.
2. Connect the cable from your monitors to the CrossFireX TM ready graphics card
installed on the PCIE16X slot.
Monitor Cable