Elitegroup Z87H3-A4 (V1.0) - Manual (Page 89)

85
Z87H3-A4 USER MANUAL
Chapter 6
Chapter 6
ATI CrossFireX
TM Technology Support
This motherboard supports the ATI CrossFireX TM Technology that allows you to in-
stall multi-graphics processing units (GPU) graphics cards. Follow the installation
procedures in this section.
Requirements
1 Two identical CrossFireX TM ready graphic cards are needed for the setup
of 2-way CrossFireX TM configuration.
2 You would need one CrossfireX TM bridge cable.
3 Make sure that your graphics card driver supports the ATI CrossFireX TM
technology. Download the latest driver from the ATI website
(www.ati.com).
4 Make sure that your power supply unit (PSU) can provide at least the mini-
mum power required by your system.
Installing CrossFireX TM graphics cards
1. Insert the CrossFireX TM graphics cards into the PCIEX16/PCIEX16_S slots. Make
sure that the card is properly seated on the slot.
For 2-way configuration, install two graphic cards on PCIEX16 & PCIEX16_S and con-
nect them with the CrossFire
TM Bridge.
* For reference only