Elitegroup AG400 Series VGA Card - Manual (Page 9)

Chapter 2:Hardware Installation
Chapter 2
Hardware Installation
To install this AG400 Series VGA card, please follow the
instructions.
Package Contents
Attention: This VGA Card series has four models. Please check
with your vendor to make sure you have bought the product you
really want.
Model Specification
AG400T8-D64
Xabre400+SiS301, 64MB DDR
AG400E8-D64 Xabre400, 64MB DDR
AG400-64TD Xabre400+SiS301, 64MB DDR
AG400-128TD Xabre400+SiS301, 128MB DDR
Your card package should contain the following items:
♦ This User’s Manual
♦ The VGA card
♦ Super Software pack.
♦ One cable (optional)
♦ One adapter (optional)
Unpacking
♦ The card contains sensitive electric components, which can be
easily damaged by static electricity, so the card should be left
in its original packing until it is installed.
♦ Unpacking and installation should be done on a grounded
anti-static mat. The operator should be wearing an anti-static
wristband, grounded at the same point as the anti-static mat.
♦ Inspect the card carton for obvious damage. Shipping and
handling may cause damage to your card. Be sure there are no
shipping and handling damages on the card before
proceeding.
DO NOT APPLY POWER TO YOUR SYSTEM IF THE
CARD HAS BEEN DAMANGE.
5