Elitegroup H61H-G11 (V2.0) - Manual (Page 34)

30
Using BIOS
EUP Support (Disabled)
This item allows user to enable or disable EUP support.
Power Management Setup
This page sets up some parameters for system power management operation.
Resume By PME (Disabled)
This item specify whether the system will be awakened from power saving modes
when activity or input signal of the specified hardware peripheral or components is
detected.
Resume By USB 1.x/2.0(S3) (Disabled)
This item allows you to enable/disable the USB device wakeup function from S3
mode.
Press <Esc> to return to the Advanced Menu page.
Main Advanced Chipset Boot Security Exit
+/- : Change Opt.
Enter/Dbl Click : Select


: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
About Resume By
PCI/PCI-E/LAN/Ext. USB3.0
PME
Power Management Setup
Resume By PME Disabled
Resume By USB 1.x/2.0(S3) Disabled
EUP Function Disabled