Atmel CAMELIACOL 2.5M - Manual (Page 7)

CAMELIACOL 2.5M user guide
7/12
2.4.3 RS232 INTERFACE
Camera configuration is set by RS232 interface. The following features are available :
Function RS232 configuration Comment
Timing mode 3 modes :
- continuous (free running)
- external trigger
- external ITC
Binning 3 modes :
- no binning
- 2x2 pixel binning
- 4x4 pixel binning
image size : 1360(H) x 1840(V)
image size : 680(H) x 920(V)
image size : 340(H) x 460(V)
CDS gain 2 positions :
- G = 1
- G = 4 G = 4 is recommended for
applications requiring high
sensitivity.
Camera gain camera gain value from 1.00x to 2.00x in
16 steps
Shutter control 2 modes :
- active
- inactive (always open)
Shutter delay 4 positions :
- 1ms
- 5ms
- 10ms
- 20ms
Anti-blooming control 2 modes :
- active
- inactive
Integration time integration time value in ms
from 1ms to 2000ms. Must be an integer.
Ex : 120 for 120ms
120.4 not allowed.
Note : video signal processing gain of the camera can be adjusted by setting :
♦
either ‘’CDS gain’’ : a commutation 1x or 4x is available at the input of the video signal processing. Use of the 4x
position is recommended for low level applications (noise is lower)
♦
or ‘’camera gain’’ : a range of 1x to 2x is available in 16 steps.