Elitegroup G900 Remote control - Manual (Page 2)

Defining the Video Source
Select the PAL, NTSC or SECAM, depending on which standard the selected
source is using. The factory default is the standard used by your purchase
country, and normally there is no need to change this setting.
If you are working outside your country, you are
required to adjust the setting of our video source.
From the WinDVR window, click on your mouse right
button and select the “Setup” item.
From the “Setup” dialog window, click on the
“Standard” selection items and drag down the arrow
to select on the type of TV standard based on your
respective country of origin.
2