Elitegroup 258KA v.7 User Manual
Page 4
■ appendix B agency regulatory notices
B-4
The attachment plug must be a two-pole, grounded type with a
Japanese Industrial Standard C8303 (15 A, 125 VAC) configuration.
Other Countries
The cord set fittings must bear the certification mark of the agency
responsible for evaluation in a specific country. Acceptable agencies
are:
BSI (UK)
OVE (Australia)
CEBEC (Belgium)
SEMKO (Sweden)
FIMKO (Finland)
DEMKO (Denmark)
NEMKO (Norway)
SETI (Finland)
EANSW (Australia)
SEV (Switzerland)
IMQ (Italy)
UTE (France)
CCC (China)
PSB (Singapore)
PSE (Japan)
BSMI (Taiwan)
B (Polish)
VDE (Germany)
SASO (Saudi Arabia)
The minimum specification for the flexible cord for Class I product
are: (1) 3GX0.75 mm
2
conductors, (2) 3-conductor cord.
The minimum specification for the flexible cord for Class II product
are: (1) 2X0.75 mm
2
conductors, (2) 2-conductor cord.
The cord set must have a current capacity of at least 10 A and a
nominal voltage rating of 125 / 250 VAC.
CAUTION: MODEL 258KA0 IS DESIGNED TO USE WITH THE
FLLOWING AC ADAPTER MODEL ONLY
Manufacture: LITE-ON ELECTRONICS, INC.; LI SHIN INTERNATIONAL
ENTERPRISE CORP.
Model: PA-1161-02, PA-1161-01(160W); 0226A20160,
0226C20160(160W)