Antec NEOLINKTM P190 - Manual (Page 9)

8
To remove the front filters:
1. Push one of the fan grilles at the right middle edge to open the grille.
2.
There are two tabs on the filter. To remove the filter, use both hands to gen-
tly push the tabs downward. Slightly angle the top of the filter towards you
before lifting it up and out.
To remove the side filter:
1. Open the side panel and disconnect the Molex fan connector from the fan
carefully.
2. Slide the filter out
For more useful suggestions and advice on building this case please visit Antec’s
FAQ’s at www.antec.com.