Elitegroup X40IIx - Manual (Page 81)

■ chapter 4 upgrading your computer
4-21
5. Locate the antenna cable with connector. Snap the cable
onto the golden connector on the DVB-T Module. (Note: The
connector is fairly small! This may take some maneuvering.
You may want to connect the antenna cables before inserting
the card into the socket.)
6. Replace the DVB-T Device Cover and re-attach Screw G.
7. Connect the Antenna to DVB-T Antenna Connector on
the left side of the computer.
Note:
You also need to install the NewSoft Presto!PVR application from the
CD to watch and record TV programs.