Elitegroup 600 - Manual (Page 59)

4.
5.
From the “Properties” display window, enable the “Aux” item and
click “OK”.
The “Aux” is now added on the “Volume Control” window.
6. Enable the “Mute” tab on the “Aux” item and close the window.
If you are using InterVideo’s WinDVR application
The procedures are almost the same as those mentioned above from steps
1 to 5 to adjust the volume control. On step 6, disable the “Mute” tab on
the “Aux” item and close the window.
51