Elitegroup L372N1 User Manual
Page 35
chapter 1 getting to know the basics
1-27
To configure the Wireless LAN function, do the following:
Go to [Start > Settings > Control Panel > Network Connections]
and right-click the Wireless Network Connection icon and
select Properties. Click Configure… and you will see a dialogue
box similar to the following.
Mode:
Select 802.11 AdHoc Mode
SSID:
Enter the same name if two or more than two
system are to establish wireless connection.
Tx Rate:
Select Fully Automatic for transmission rate
PS Mode: Select Enable
Channel:
Depending on your region or location, you may
enter a specific value. For example, for North
America, you may select channel 1 through 11. Go
to [Start > Programs > Country Domain] for a list of
suitable channel for a particular region.