AT&T TL74458 - Manual (Page 12)

7
1. Plug the small end of
the handset charger
power adapter into the
jack on the underside
of the charger, then
route the cord through
the slot as shown.
2. Plug the handset
charger power adapter
into a power outlet not
controlled by a wall
switch.
Getting started
Charger installation
IMPORTANT INFORMATION
1. Use only the power adapters supplied with this product or equivalent. To order a replacement
power adapter, visit our website at
www.telephones.att.com
, or call
1 (800) 222-3111
. In Canada, dial
1 (866) 288-4268
.
2. These power adapters are intended to be correctly oriented in a vertical or floor mount position.