Elitegroup DS110 (V1.0) - Manual (Page 29)

23
Using BIOS
Parallel Port Configuration
Scroll to this item and press <Enter> to view the following screen:
Parallel Port (Enabled)
This item allows you to enable or disable parallel port.
Device Settings (IO=3F 8h; IRQ=5)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
+/- :Value
Enter : Select
:Select Screen
: Select Item
Parallel Port Configuration
Parallel Port [Enabled]
Device Settings IO=3F8h; IRQ=5;
Change Settings [Auto]
Device Mode
[Standard and Bi-dire...]
F1:General Help
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
Enable or Disable Parallel
Port (LPT/LPTE)
Main Advanced Chipset Frequency/Voltage Control Boot Security Save & Exit
Device Mode (Standard and Bi-dire...)
This item shows the information of the device mode.
Press <Esc> to return to the Super IO Configuration page.
Press <Esc> to return to the Advanced Menu page.