Elitegroup MS200 (V1.0) - Manual (Page 28)

21
Using BIOS
System Component Characteristics
These items display the monitoring of the overall inboard hardware health events,
such as System & CPU temperature, CPU & DIMM voltage, CPU & system fan
speed,...etc.
• CPU Temperature (PECI Mode)
• System Temperature
• CPU Fan1 Speed
• CPU Fan2 Speed
• CPU Core
• + 3.30V
• + 5.00V
• + 12.00V
• 5VSB
• VBAT
Shutdown Temperature (Disabled)
Enable you to set the maximum temperature the system can reach before powering
down.
Press <Esc> to return to the main menu setting page.
Smart Fan (Enabled)
If enable, fan speed will speed-up or slow-down according the temperature.
Frequency/Voltage Control
This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have in-
stalled in your system.
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
Frequency/Voltage Control
Help Item
Enable Clock to All PCI/PCIE Disabled
Spread Spectrum Enabled
Ratio Status: Unlocked (Min: 09, Max: 23)
Ratio CMOS Setting
23
Options
Disabled
Enabled
: Move F10: Save ESC: Exit +/-/: Value Enter : Select
F9: Optimized Defaults
F1:General Help mnlk
F7: Previous Values F8: Fail-Safe Defaults