Elitegroup CDC-TI (V1.0A) - Manual (Page 43)

Chapter 3
CDC-TI USER MANUAL
39
SATA Configuration
Use this item to show the mode of serial SATA configuration options.
Main Advanced Chipset Tweak Boot Security Exit
+/- : Change Opt.
Enter/Dbl Click : Select
lk
mn
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
(1) IDE Mode. (2) AHCI
Mode. SATA Configuration
SATA Mode IDE Mode
Serial-ATA Controller Enhanced
SATA Port1 Not Present
SATA Port2 ST3500418AS (500.1G
SATA Mode (IDE Mode)
Use this item to select SATA mode.
SATA Port 1~2 (Not Present/ST3500418AS (500.1G)
This motherboard supports two SATA channels and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel.
Serial-ATA Controller (Enhanced)
Use this item to select Serial_ATA controller options: Disabled, Compatible, En-
hanced.
Press <Esc> to return to the Advanced Menu page. Press <Esc> to return to the Advanced Menu page.