Elitegroup TIGD2-I (V1.0) - Manual (Page 42)

TIGD2-I USER MANUAL
38
Chapter 3
Serial Port 4 Configuration
Scroll to this item and press <Enter> to view the following screen:
Serial Port 4 Configuration
Serial Port [Enabled]
Device Settings IO=2E8h; IRQ=7;
Change Settings [Auto]
Serial Port 4 RS-485 [Disable]
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011, American Megatrends, Inc.
Enable or Disable Serial Port
(COM)
Main Advanced Chipset Tweak Boot Security Exit
F1:General Help
+/- : Change Opt.
Enter : Select
:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=3E8h; IRQ=7)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Press <Esc> to return to the Super IO Configuration page.
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=2E8h; IRQ=7)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Press <Esc> to return to the Super IO Configuration page.
Serial Port 4 RS-485 (Disable)
Use this item to enable or disable the serial port 4 RS-485.