HATZ Diesel 1B50W - Manual (Page 19)

Depending whether the engine is equipped with
or without automatic valve clearance adjustment
one of the illustrated maintenance plans is in-
cluded. This label should be affixed to the engine
or equipment in an easily visible position. The
maintenance chart governs the maintenance in-
tervals. On new or reconditioned engines, after the
first 25 operating hours, always
– Change engine oil, Chapter 5.3.1.
– Check valve clearances and adjust if
necessary, Chapter 5.3.2.
– Examine screw connections, chapter 5.3.4.
Do not tighten the cylinder head fastening.
If the engine is not used frequently, change the
engine oil after 12 months at the latest, regard-
less of the actual number of hours it has been in
operation.
17
Model without automatic valve clearance adjustment.
Model with automatic valve clearance adjustment.
1B20: 0,20mm 1B27: 0,10mm
1B30: 0,10mm 1B40: 0,10mm
1B50: 0,10mm
0000 051 104 06
= 1h
max
OIL
500h
250h
IN
EX
max
0000 052 502 02
= 1h
max
OIL
500h
250h
IN
EX
max
AUTOM.