Hired-Hand RollSeal Rollup Curtains: ROLLUP CURTAIN SYSTEM Rev 11-05 - Manual (Page 7)

Part No. 4801-5138 Rev 11-05 Rollup Curtain System Page 7
5. Use Of Equipment
The RollSeal RollUp Curtain is a complete curtain system for an entire building sidewall. The
curtain system rolls and unrolls by action of a single drive.
6. Installation
6.1 Tools Required
3/8 in. (10mm) power screwdriver Carpenter's level
3/16 in. (5 mm) drill bit and power drill Hammer
Pop rivet gun Chalk line
Ladder Tape measure
6.2 Receipt And Inspection Of Parts
The RollSeal RollUp Curtain System is shipped as parts that require assembly.
Identify components by the Parts/Assemblies section in back of this manual.
When components are received, check for damaged, loose or missing parts. If there are damaged or
missing parts, contact your RollSeal distributor immediately.
For efficient installation, follow steps in order presented in this manual.
Please read the instructions carefully before beginning installation.