Before you start, Installing the washer, Tools – Alliance Laundry Systems H236I User Manual
Page 9: Electrical requirements, Water supply requirements, Step 1: position washer near installation area
Advertising

685945
7
Before You Start . . .
Tools
For most installations, the basic tools you will need are:
Electrical Requirements
Refer to serial plate for specific electrical requirements.
For more detailed information, refer to section on
Electrical Requirements.
Water Supply Requirements
Washer needs two standard 3/4 inch (19.1 mm) water
supply faucets with a pressure between 20-120 pounds
per square inch (138 to 827 kPa). For more detailed
information, refer to section on Water Supply
Requirements.
Installing the Washer . . .
Step 1:
Position Washer Near Installation
Area
Move washer so that it is within four feet of the desired
area of installation.
D074IE1H
LEVEL
SCREWDRIVER
PLIERS
WRENCH
SOCKET
WRENCH
9/1
6
"
H054IE1A
Advertising