Kushlan Products 450DD - Manual (Page 3)

Mixer Instructions
A. LUBRICATION: There are grease fittings on all models. Apply any type of EP grease until grease begins to come out of the
bearings. LUBRICATE ALL FITTINGS BEFORE EACH USE
B. GEARBOX MOTOR: Mixer shipped with lubricate/oil in gearbox. Change lubricate/oil every 200 hours. Use Synthetic
Mobile 1 LS 75W-90 oil.
C. EXTENSION CORD: Use only out door approved, 14 gauge or larger, grounded extension cords.
D. GENERAL: Check all screws for tight ness before each use.
E. CLEANING: Do not spray water on or into the motor. Thorough cleaning of the mixer after each use is recom
mended and will add to the service life.
3