Kushlan Products Industrial Portable Tripod Mixer - Manual (Page 3)

KU S H LA N
P R O D U C T S , LLC
!
Safety
Instructions
For the safety of yourself and others around you, it is extremely important that you observe the following notes.
!
Mixer
Instructions
A. Lubrication: Grease wheel bearings (29). Apply any type of multipurpose grease until grease begins
to come out of the bushings/bearings on wheels.
Lubricate all ttings before each use
B. Extension Cord: Use only outdoor approved, 14 gauge or larger, grounded extension cords.
C. General: Check all screws for tightness before each use.
D. Concrete Mixing: Do not insert sharp objects into the plastic mixing drum. Doing so will damage the drum.
E. Cleaning: Do not spray water on or into the motor. Thorough cleaning of the mixer after each use is
recommended and will add to the service life.
2
1. Keep hands and clothing away from moving parts at all times.
2. Do not operate this machine under the in uence of alcohol or while taking medication that impairs the senses or reactions.
3. Make certain that the work area around the machine is clear of debris and obstructions.
4. Keep all unauthorized and untrained people away from the machine at all times.
5. Never let the mixer run unattended even for a brief moment.
6. Turn o the motor when you leave the machine.
7. Only use or operate the mixer on level ground to prevent the mixer from tipping over.
8. Do not abuse the power cord; i.e. Never yank on the cord to disconnect it. Keep the cord away from heat, oil, and sharp edges.
9. Do not over reach while working with the mixer. Keep proper footing and balance at all times when loading or unloading the mixer.
10. Never allow children or inexperienced operators to operate or repair the mixer.
11. Use only factory authorized parts for replacement.
12. Keep these operation instructions with the machine at all times.
13. Always wear safety glasses and safety shoes when operating and moving equipment.
14. Safety decals-replace missing or damaged safety decals.