Lincoln Electric IM926 EAGLE 10,000 - Manual (Page 8)

A-1 INSTALLATION
EAGLE™ 10,000
A-1
TECHNICAL SPECIFICATIONS - EAGLE™ 10,000 (K2343-2 )
INPUT - GASOLINE ENGINE
RATED OUTPUT @ 104°F (40°C) - WELDER
HEIGHT WIDTH DEPTH WEIGHT
30.3 in. 19.1 in. 42.3 in.
770 mm 485 mm 1074 mm 502 lbs. (228kg)
RATED OUTPUT @ 104°F (40°C) - GENERATOR
Welding Output
DC Constant Current 210A / 25V / 100%
Auxiliary Power 1
10,500 Watts Peak, 60 Hz AC
9,000 Watts Continuous, 60 Hz AC
120/240 Volts
PHYSICAL DIMENSIONS
Make/Model
Kohler
CH23S
Description
2 cylinder
4 Cycle
Air-Cooled
Gasoline
Engine.
Aluminum Alloy
with Cast Iron
Liners,
Electronic Start
Operating
Speed (RPM)
High Idle 3700
Full Load 3500
Low Idle 2200
Displacement
cu. in.
(cu.cm.)
41(674)
Kohler
Capacities
Fuel:
9 Gal (34 L)
Lubricating Oil:
2.0 Qts. (1.9 L)
Horsepower
23 HP @
3600 RPM
(Kohler)
Starting
System
12VDC
Battery
Electric Start
Group 58
Battery
(435 cold
Cranking
Amps)
1. Output rating in watts is equivalent to volt - amperes at unity factor.Output voltage is within +/-10% at all loads up to rated capacity.
When welding available auxiliary power will be reduced.