Lincoln Electric IM876 eCELL WIRE DRIVE SYSTEM - Manual (Page 10)

A-3 INSTALLATION
eCELL ™ WIRE DRIVE SYSTEM
A-3
SAFETY PRECAUTION
MOUNTING AND UNIT DIMENSIONS
Mount the eCell™ Wire Drive System on the designat-
ed bracket of the eCell™ only. (See Figure A.1).
Side View (Door not shown for clarity). (See Figure A.2)
Rear View. (See Figure A.3)
ELECTRIC SHOCK can kill.
• Turn the input power OFF at the
welding power source before instal-
lation or changing drive rolls and/or
guides.
• Do not touch electrically live parts.
• When inching with the gun trigger, electrode
and drive mechanism are "hot" to work and
ground and could remain energized several
seconds after the gun trigger is released.
• Welding power source must be connected to
system ground per the National Electrical Code
or any applicable local codes.
• Only qualified personnel should perform main-
tenance work.
----------------------------------------------------------------------------------------
2.76 2.76
1.38 1.38
2.38 2.38 6.00 6.00
2.25 2.25
5/16 - 18 THREADS 5/16 - 18 THREADS
(4 PLACES) (4 PLACES)
4.97 4.97
8.50 8.50
9.93 9.93
11.25 11.25
4.97 4.97
1.39 1.39
8.82 8.82
5.08 5.08
8.50 8.50
FIGURE A.1
FIGURE A.2 FIGURE A.3
WARNING