Lincoln Electric IM872 LF-74 WIRE FEEDER - Manual (Page 11)

A-3 INSTALLATION
LF-74
A-3
BENCH MOUNT
The LF-74 mounts in a variety of configurations. As
shipped from the factory, the LF-74 is suitable for
bench mounting or placing directly on top of the weld-
ing power source (CV-xxx and DC-xxx product family
only).
SWIVEL MOUNT
The base model and heavy duty bench models may
be mounted onto a swivel when a top a welding power
source.
BOOM MOUNT
When boom mounting, remove the wire reel stand (if
assembled) and secure the wire feeder directly to the
desired surface.
SUSPENDED
Only suspend the wire feeder by the handle/lift bail of
the portability kit.
K2426-1 shown with K2328-1Standard Duty Wire
Reel Stand and K2331-1 Lift Bail
Alternative methods for hanging the wire feeder
must not be used unless insulation is provided
between the wire feeder enclosure and the hang-
ing device.
------------------------------------------------------------------------
Bench Mount
K1557-1Swivel Kit and Bench Model, with Heavy
Duty Wire Reel Stand.
K2332-1 Swivel Kit and Base Model LF-74
WARNING