Acoustic Research XMC90 - Manual (Page 18)

MODEL XMC90 OWNER’S MANUAL
VERSION V 0.0 Page 18 of 20
9 . 0 I n i t i a l U s e * a n d B a t t e r y R e p l a c e m e n t
*When purchased the remote control has a battery installed with a plastic insert to prevent battery discharge. Remove
the plastic insert before attempting to use the remote.
1. Remove the battery holder. Refer to the drawing.
2. Insert the battery into the battery holder and insert the battery holder into the remote. Be sure to observe the correct
polarity
3. For best results, aim the remote directly at the remote receiver window within 10 feet, and angles not exceeding 60
degrees.
4. The path between the remote control and remote sensor should be free of obstructions.
5. Under normal use the battery will last for approximately one year.
6. Remove the battery if the remote is not going to be used for a long time or during storage.