Lincoln Electric IM850 POWER FEED 10S - Manual (Page 11)

A-1 INSTALLATION
POWER FEED 10S
A-1
SAFETY PRECAUTIONS
Read this entire installation section before you
start installation.
ELECTRIC SHOCK can kill.
• Only qualified personnel should per-
form this installation.
• Turn the input power OFF at the dis-
connect switch or fuse box before
working on this equipment. Turn off
the input power to any other equip-
ment connected to the welding sys-
tem at the disconnect switch or fuse
box before working on the equip-
ment.
• Do not touch electrically hot parts.
-------------------------------------------------------------
NON-STANDARD SAFETY INFORMATION
The PF-10S series of wire drives may be at weld-
ing voltage potential when the output of the power
source is active.
------------------------------------------------------------------------
INPUT AND GROUND CONNECTIONS
Only a qualified electrician should connect the
POWER FEED 10S. Installation should be made in
accordance with the appropriate National Electrical
Code, all local codes and the information in this manu-
al.
LOCATION AND MOUNTING
• The POWER FEED 10S will operate in harsh envi-
ronments.
HIGH FREQUENCY PROTECTION
Locate the POWER FEED 10S away from radio con-
trolled machinery.
WARNING
CAUTION