Lincoln Electric IM753 RANGER 9 - Manual (Page 23)

PROCESS CONTROL IDLE OUTPUT WELDING ELECTRODE TO START WELDING
CABLE MODE CONTROL TERMINALS STATE WHEN
USED
SWITCH SWITCH NOT WELDING
Stick – CC No Auto At Welder Always on Hot Touch electrode to
work. Welding starts
immediately and engine
goes to high idle.
TIG - CC Yes Auto Remote Remote Cold Press Amptrol. Welding
K930-1/K936-1 starts immediately.
(With Amptrol)
Wire Feed - CV, Yes Auto Remote Remote Cold Press gun trigger,
LN-25 with 42V RANGER 9 contactor
Remote Control Kit closes. Welding starts
immediately and engine
goes to high idle.
Wire Feed - CV No Auto At Welder Always on Cold Press gun trigger, LN25
LN-25 with internal contactor closes. Weld-
contactor ing starts immediately
and engine goes to high
idle.
Wire Feed - CV Yes Auto Remote Remote Cold Press gun trigger,
LN-742 RANGER 9 contactor
closes. Welding starts
immediately and engine
goes to high idle.
Wire Feed - CV, Yes High Remote Remote Cold Press gun trigger,
LN-7 RANGER 9 contactor
closes. Welding starts
immediately.
B-6 OPERATION B-6
RANGER 9
SUMMARY OF WELDING
PROCESSES