Lincoln Electric IM790 SP-175 Plus - Manual (Page 22)

C-1 C-1
SP-175 PLUS
ACCESSORIES
OPTIONAL ACCESSORIES
1. K520 Utility Cart — Designed to transport the
Lincoln family of small welders. Has provisions for
mounting a single gas cylinder. Has front casters
and large rear wheels. Handle height is easily
adjustable. Bottom tray provided for tools and
accessories. Easy assembly required; takes less
than 15 minutes.
2. K586-1 Deluxe Adjustable Gas Regulator &
Hose Kit
Accommodates CO
2
or mixed Gas Cylinders.
3. K663-2 Aluminum Feeding Kit — This kit recom-
mended for welding with .035 Aluminum wire.
Included with this kit are a drive roll, cable liner and
.035 contact tip. It is important when changing
between welding with steel wire and aluminum
to exchange feeding components due to the
lubricant applied to steel wire. Failure to do so
may result in contaminated welds when weld-
ing aluminum.
See Maintenance section for instructions on installing
drive roll, cable liner, contact tip and their proper con-
figuration.
4. K549-1 .035 (0.9 mm) Innershield Welding Kit
Includes a contact tip, a gasless nozzle and a
cable liner to permit the Magnum
™ 100L gun and
cable to use .030-.035 ” (0.8-0.9 mm) diameter flux-
cored electrode. Also included is a spool of .035
(0.9 mm) Innershield NR-211-MP.
5. KP666-035c Knurled Drive Roll (optional) --
Reversable Drive Roll with double knurled grooves
for .035 (0.9mm) cored electrode.
6. K549-4 .045 ” (1.2mm) Innershield Welding Kit
Includes a contact tip, a gasless nozzle, a .045 ”
(1,2mm) knurled drive roll, acable liner and guide
tubes to permit the Magnum
™ 100L gun and
cable to use .045 ” (1.2mm ) diameter flux- cored
electrode. Also included is a spool of .045 (1.2mm)
Innershield NR-211-MP.