Lincoln Electric IM558 Synergic 7 and 7H Water Cooled - Manual (Page 30)

C-3 ACCESSORIES C-3
K479 - Magnum 400 FM GMAW gun and cable
assemblies are rated for 400 amps, 60% duty cycle.
(Consult sales specifications for appropriate models).
K556 * - GMAW process Magnum 400XA X-TRAC-
TOR gun and cable assemblies are rated at 400
amps, 60% duty cycle. (Consult sales specifications
for appropriate models).
K566 * - GMAW process Magnum 250XA X-TRAC-
TOR gun and cable assemblies are rated 250 amps,
60% duty cycle. (Consult sales specifications for
appropriate models).
* K179 type vacuum unit not recommended for
use with Synergic 7.
MISC. OPTIONS:
K659-1 (Gas Guard Regulator) - Adjustable flow regu-
lator with removable adjustor key for CO2 and Argon
blend gases. Mounts onto wire drive gas inlet, and
reduces gas waste and arc start "blow" by reducing
surge caused by excess pressure in supply hose.
K1449-1 (Dual Procedure Remote Control) - Includes
a remote control box with a 16ft. (5m) length control
cable with 4-pin plug for the mating receptacle on the
bottom of the Synergic 7 control box. The remote
control box contains 2 rotating knob encoders, one
controls arc voltage and the other controls weld wire
feed speed, and a procedure selector switch which
function the same as comparable controls on the front
panel, which are disabled when the remote is con-
nected.
K683-1 (Dual Procedure Switch) - Kit includes gun
switch, and mountings for Lincoln Innershield and
Magnum guns, with 15 ft. (4.5 m) control cable and 3-
pin plug.
K163 Undercarriage - For all Synergic 7 wire reel
stand combinations. Includes mounting frame, front
casters, 10" (254 mm) O.D. rear wheels, and handle.
Use when portability is required.
K178-1 Swivel Platform - For all Synergic 7 wire reel
stand combinations. For mounting wire feeder wire
reel stand assembly on top of suitable Lincoln Idealarc
power sources. Recommended input cable length is 7
ft. (2 m) when using the K178-1 on the Invertec power
sources.
SYNERGIC 7 & 7H