LT Security LTD6299 - Manual (Page 48)

- 47 -
To replace the hard drive in the removable hard drive unit, disconnect the power and data cable
and reconnect them to the new hard drive. Screw the hard drive into the hard drive bracket to
secure the hard drive and replace the top cover. Next, reinstall the hard drive enclosure into
the DVR. To ensure proper closure, keep the hard drive enclosure flap up until the enclosure is
fully inside the DVR, then close the flap.
When replacing with another hard drive, please ensure the new hard drive has been formatted
for this DVR. If the hard drive has not been formatted yet, the DVR will not find the hard
drive. Please see 6.6 HDD Setup for more information.
6.7 Password Setup
In Setup Menu display, press ▲▼ to change the highlighted option to Password, and then
press ENTER to call up Password Setup as shown.
The Password Setup allows the administrator to add new users, delete existing ones, and/or
modify the user’s name, password, and/or level.
There are three password levels in the system, including Administrator (highest),
Supervisor, and Operator (lowest). The Operator can operate live video display, the
Supervisor live video display, image playback and archive, and the Administrator everything.
The system allows up to 18 user accounts.
There is one factory-preset login name/password aa/11 at Administrator level. The user
can use it to login the system for the first time.
The general operations are as below:
„ ▲▼◄►
Press these buttons to select the items. The display will scroll up/down if the selected
item is not shown on the screen.
„ MODE => Select/Deselect as default
Press this button to select this user as the default one at login, or deselect if this user is the
default login user. An asterisk (*) will be shown preceding the number for the default
login user. And this login name/password will be the default one each time the login
dialog is shown, so the user doesn’t need to enter the text to login the system.