Audiovox FR-531-2 - Manual (Page 9)

128-6255A
9 of 16
-9-
USING YOUR FR-531-2
Turning the Transceiver On and Off
Pressing the power button (1) for 2 seconds will activate the unit. The speaker
will sound a beep tone to confirm the transceiver’s activation. In addition, the
transceiver will perform a 1-second power-on self-test, whereby the LCD dis-
play will show all functional
items, including a test of the 2-digit channel
display ( ). To turn the unit off, simply press and hold the power button for
2 seconds. The unit will confirm its shutdown with a single beep tone.
Volume Level
Audio reception volume is controlled by the Up (
▲ 10) and the Down ( ▼ 9)
button. Momentarily pressing either button will raise or lower the volume
level.
Low Battery Alert
When the batteries are in need of replacement or charging, the low battery
icon (
) will appear on the LCD display and the transceiver will sound a
1-minute beep to alert the user. If unattended, the unit will eventually turn off.
Monitor Button
You can monitor channel activity by pressing the Monitor (M) button (3). If
pressed for more than 2 seconds, you can continuously monitor channel
activity. Press again, momentarily, and monitoring is disabled. Pressing this
button momentarily will cause the unit to beep and the LCD backlight func-
tion will be activated for 5 seconds.
Function (F) Select Button (12)
Pressing this button will allow selection of frequency channels as well as
selection of the various unit functions. Each press permits selection of the
desired channel (1–14) and Roger Beep tone.