LT Security LTD1651M5 - Manual (Page 27)

2) SPOT DWELL: 1 to 60 seconds.
SPOT DWELL TIME can be changed using LEFT or RIGHT button. Or after pressing
ENTER button, SEQ DWELL TIME from none, 1 seconds to 60 seconds which
decide a period of channel by channel can be selected by UP or DOWN button.
And then ENTER button is used for confirming setting value.
All of video channels connected with video inputs of DVR can be sequentially
switched for SPOT monitoring output.
3) TIME/DATE OSD: ON/ OFF
When it is set as OFF, characters which indicates time/ date will be disappeared on
monitor. But time and date information still are added into recording files.
TIME/DATE OSD ON/ OFF can be changed using LEFT or RIGHT button.
4) CAM NO OSD: ON/ OFF
When it is set as OFF, characters which indicates camera number will be disappeared
on monitor. CAM NO OSD ON/ OFF can be changed using LEFT or RIGHT button.
5) VIDEO LOSS OSD: ON/ OFF
VIDEO LOSS OSD ON/ OFF can be changed using LEFT or RIGHT button. When it
is set as OFF, black pictures will be displayed in the cameo with video loss. When it is
set as ON, “VIDEO LOSS” character with white color will be displayed in blue screen.
6) POP-UP DISPLAY: ON/ OFF
POP-UP DISPLAY ON/ OFF can be changed using LEFT or RIGHT button. When it is
set as OFF, pop-up image of camera(s) which motion detection or alarm triggering is
occurred will not be displayed. When it is set as ON, the channel (s) which motion is
(are) detected or external alarm is (are) triggered will be POP-UP in monitor during
maximum 30 seconds. In case that motion detection or alarm event is occurred more
than two channels, POP-UP picture will be appeared in monitor turn by turn during 3
seconds for each channels. Total period of POP-UP display is 30 seconds.
22