LT Security IP85PW User Manual
Page 28
- 28 -
There are three methods to enable WIFI function: Static IP
Address/PPPOE/DHCP.
�
Static IP Address
�
PPPOE
If you choose to PPPOE, please contact your network operators, to provide
the “PPPOE User Name” and “PPPOE Password"”
�
DHCP
The following parameters will keep the same under these three methods.
�
IP
IP
IP
IP Address
Address
Address
Address Based on network environment to fill out your own IP device
address
�
Subnet
Subnet
Subnet
Subnet Mask
Mask
Mask
Mask Based on network environment to fill out
�
Gateway
Gateway
Gateway
Gateway Keep this item the same with the IP address of your wireless router.
�
DNS
DNS
DNS
DNS Keep the same with your route’s DNS. This item related to the
application of DDNS (Dynamic Domain Name Server) and Email Alarm.
NOTE: When connect the WAN via WIFI, Please enable the “WIFI Gateway as
Default Gateway”, and choose WIFI specification: 802.11b & 802.11g.
For detail Wireless setting, please refer to: