LumaSense Technologies IGA 740-LO - Manual (Page 15)

11
4.1.3 Connections and interfaces
Connection for 5-pole connecting cable
The 5-pole plug to connect the instrument is at the rear side of the unit (see Fig. 5).
The contacts of the 5-pole plug are arranged as follows:
Plug pin Meaning
1 +24 V Supply voltage (DC or AC)
2 Supply voltage 0 V (DC or AC)
3 ground output
4 Analogue output [0 (4) … 20] mA
5 shield
Fig. 5 Connecting plug for 5-pin connecting cable
Mounting
using various brackets.
and socket mounting support with clamp or thread.
This mounting plate ensures secure assembly of the pyrometer as well as optimal adjust-
ment with respect to the object being measured (for order data see page 22).
Power supply connection and
output [0(4) … 20] mA