LumaSense Technologies ISR 6-TV Advanced - Manual (Page 12)

Series 6 – TV Advanced Manual Electrical Installation · 12
Operating Mode
The two dots above the letter “T” show
the selected operating mode
(ISR 6-TV Advanced only).
· 2-channel mode: 2 dots
displayed. If the signal falls
below the set Relative Signal
(see "Relative Signal" in
ISR 6 Advanced Manual), the
temperature displayed on the
image will be flashing.
· 1-channel mode: only the left
dot is displayed.
· Metal mode: the left dot is
displayed continuously,
the right dot flashes.