LumaSense Technologies LumaSMART Controller - Manual (Page 3)

Main Menu
The Main Menu contains buttons leading to all of
the main functions and configuration options of the
LumaSMART.
Set Up
The Set Up Menu contains menus allowing you to
configure Transformer Information, Relay and Control,
Date and Time, Analog Outputs, Administrator Tools, and
Channel Setup.
Note: A password is required to access the Setup screen.
The default authentication code for entering the Setup
menu is 12345. It is strongly recommended that you
change your authentication code from the default to a
unique code for added security.
Note: When configuring options in the Set Up submenus,
be sure to press the Save button before exiting the
screen. To exit the screen without saving, press the
button.
Transformer Info Setup
The Transformer Info Setup screen allows you to input
the details of your transformer, including name, type and
year of manufacture.
1) Press the button next to each entry to bring up
a keyboard or number pad.
2) Type a new value and press Enter to apply it.
3) Press to save all entries.
Date & Time
The Date and Time screen allows you to set the date and
time. This should be done soon after installation to ensure
the correct date and time is included in the data logs.
Administrator Setup
The Administrator Setup screen allows you to make
important updates to your software by changing the
authentication codes or applying a firmware upgrade. A
password is required to access this screen.
Download Firmware - Allows you to download updates.
Export Error Log - Allows you to export any errors.
Authentication Code - Allows you to change the code for
the setup menu and/or for the administrative setup menu.
Inventory Data - Allows you to view all manufacturing
test data and unit information.
Relay & Control
Allows you to configure settings for each relay, such as
the relay’s name, Alarm/Restore setpoints, Failsafe opera-
tion. Select the EDIT tab for the desired relay to change
its settings.
Relay Setup
The Relay Setup screen allows you to configure the
details of each relay. You can set the name, Energize con-
figuration, association to probe(s), OR or AVG function,
and Alarm and Restore setpoints. Press the
button
next to each entry to configure it.
Name - Allows you to give the relay a descriptive title.
Pressing Edit will bring up a keyboard where you can
enter an alphanumeric name.
Relay Configuration - Allows you to select whether the
relay is Disabled (default) or Normally Deenergized
(standard) or Normally Energized (failsafe).
Control Settings - Takes you to a screen where you can
configure the relay’s logical function and which channels
that function applies to.