Mediabridge MWN-WAPR150Nv2 User Guide - Manual (Page 32)

MWN-WAPR150Nv2
27
Example: This example shows how to bridge two MWN-WAPR150Nv2 routers.
First check the following settings:
First MWN-WAPR150Nv2 (connected to your ISP)
LAN IP Address: <Your Choice. We will use the default 192.168.8.1 for the example>
SSID: <Your Choice>
Channel: <Your Choice 1~11>
Extension Channel: <Will be set automatically. Simply record it.>
Wireless Security: <Your Choice>
Wireless Working Mode: WDS Bridge Mode
DHCP Server: Enabled
Second MWN-WAPR150Nv2 (used to extend your network)
LAN IP Address: 192.168.8.XXX where XXX is 2~254 (192.168.8.2 will be used in this
example)
SSID: <MUST Match First MWN-WAPR150Nv2>
Channel: <MUST Match First MWN-WAPR150Nv2>
Extension Channel: <MUST Match First MWN-WAPR150Nv2>
Wireless Security: <MUST Match First MWN-WAPR150Nv2>
Wireless Working Mode: WDS Bridge Mode
DHCP Server: Enabled (will be disabled as the last step of this configuration)
Connect the Second MWN-WAPR150Nv2 to the First MWN-WAPR150Nv2
wirelessly:
1. Click “Open Scan” and select the First MWN-WAPR150Nv2 from the list and click
the ”OK” button on the dialog box and then the corresponding wireless MAC address will
be added to the AP MAC address field automatically.