Mediabridge MWN-USB150N Mac - Manual

MWN-USB150N Wireless-N USB 2.0 Adapter
Mac Installation Instructions
Medialink Products | 1951 Old Cuthbert Road Suite 301 Cherry Hill NJ 08034 | Phone: 856-216-8222
Email: [email protected] Website: www.medialinkproducts.com
***PLEASE NOTE***
Medialink Products does not currently provide technical support for the use of this
adapter with any operating system that is not Windows based. This draft of installation
instructions are the only form of assistance we can provide for this application. We
apologize for this inconvenience and are working towards providing a more robust support
system. In the meantime if your experience warrants an amendment to these instructions,
we will welcome any and all suggestions.
Thank you for your understanding.
Mac OS X network card installing step.
1. Plug the USB wireless network card to your PC (Mac host).
2. Find the attached driver file: RTUSB1.3.0.0 ui.damg and double click it. The
system will set up a new folder (RTUSB_Ralink_installe) under the same directory.
3. Open the folder of USBWireless-10.4(USBWireless-10.x) under
RTUSB_Ralink_installe, and select to install the drive file of version 10.4.
4. Double click USBWireless-Tiger.pkg under the folder of USB wireless-10.4 and
make the system to enter drive program installing.
5. While displaying welcome interface, click “Continue” and select the folder that you
need to install.
6. After you select the right folder, click “Continue” and select “Upgrade” to install
drive file.
7. You will be prompted to input your user name and password.
8. The installing program will restart PC after install is finished, it needs you to
confirm if you need to install, click “Continue” and system will install drive file
under your appointed folder automatically.
9. Restart PC to finish installing program.
10. After system restart, it will scan for wireless network signal, you can select and
connect joined network based on the scanning result to finish connecting host and
wireless network.