Mediabridge MWN-WAPR300N User Guide - Manual (Page 25)

MWN-WAPR300N
20
 LAN MAC Address: The Router’s LAN MAC Address, which is unchangeable.
 IP Address: The Router’s LAN IP Address (not your PC’s IP address and not the
WAN IP Address that your router acquires from your modem/ISP). The default
value is 192.168.8.1. You can change this when necessary.
 Subnet Mask: The Router’s LAN Subnet Mask. The default value is
255.255.255.0
 Click “Apply” when finished.
NOTES:
Once you modify the IP address, you need to remember it for next time you
log in to the web-based utility. If your computer loses access to the router
after you change the LAN IP Address, you will need to refresh the computer’s
connection to the router. Disabling/Enabling the Local Area Connection is one
way to do that.
If you wish to change the IP Address to a Class A (10.X.X.X) or Class B
(172.16.X.X) address, then the Subnet Mask must be set accordingly:
o Class A IP Addresses (10.X.X.X) require the Subnet Mask: 255.0.0.0
o Class B IP Addresses (172.16.X.X) require the Subnet Mask:
255.255.0.0
4.4 MAC Clone
This page is for the Router’s MAC Address that is registered to the WAN connection.