Aztech Systems DSL9100R - Manual (Page 28)

28
User Manual User Manual User Manual User Manual User Manual
• RFC 2516 PPP over Ethernet Relay support
• Up to 8 Multiple PVCs
• OAM (I.610) F4/F5 Loopback, Send, and Receive
C.1.2 Networking Features
• IEEE 802.1d Transparent Bridge
• Static, RIP1, RIP2 routing support
• NAT – IP Masquerading
• DHCP Server
• DNS Relay Agent
• IP Port Forwarding
• PPTP Access Concentrator
• Telnet server for Remote management
• TFTP Server and Client for software update
• SNMP version 1 Agent
C.1.3 Local Area Network Specifications
• Store and Forward Switch Architecture which provides better integrity of data and
prevents wrong order of packets at the output ports.
• Provides 2Kbyte Frame Buffer Memory per port
• Offers 4 dual-speed 10 Base-T / 100 Base-TX switch ports
• Supports full-wire speed, full-duplex traffic on every port simultaneously.
• Fully support IEEE 802.3 Ethernet and Fast Ethernet
• Fully support IEEE 802.3u Auto-Negotiation which provides automatic selection of
transmission modes, half and full duplex as well as transmission speeds, 10 Mbps
or 100 Mbps
• Supports self-learning Layer 2 Address Resolution and has a storage capacity of 17K
MAC addresses
• Supports IEEE 802.1x Flow Control in Full Duplex and Back Pressure for Half-Duplex.
• Multi-stand design allows for convenient and flexible placing