Rhino Shelter Party Tent 14W X 14L X 9H - Manual (Page 6)

Assembly Instructions 14 X 14 Party Tent Style
V2.0 Party Tent 14 X 14 Size
Please do NOT Return Unit to Store or Dealer
Please Call Customer Service 800-447-7079 or 203-877-7070
GREAT CARE AND SPECIAL PRECAUTIONS MUST BE
TAKEN IN ADVERSE WEATHER CONDITIONS.
INSTALLING THE UPTIGHT LEGS
AT THIS STAGE, ESPECIALLY IN WINDY WEATHER
CONDITIONS, THAT THE MOST CARE AND
PRECAUTION MUST BE TAKEN.
The frame and the roof cover are heavy to lift so adequate
assistance will be required to guard against personal injury
and should only be done one side at a time: Lift the first
side and insert the legs into the connectors remembering
that the poles with the numerous holes in them are for
each corner.
If the end wall panels (#10) are to be used then attach
these to the rafter poles now before the tent is at its full
height.
Repeat the procedure with the remaining side panel. At
this point the tent are most vulnerable to injury & damage if
it is windy. If it is windy at all, use the guy ropes to
stabilize the tent before the side panels are attached.
There are holes in the feet plates through which they may
be pegged to the ground, or on hard standing using
appropriate fixings (not supplied).
Part of the roof cover extends down each of the 4 corners
and these attach to the poles by way of the “S” shaped
hooks that locate in pre-drilled holes.
To attach the side wall panels (#11), start at the top and at
one of the panel and use the bungee cords (#13) in the