RIKON Power Tools 61-1600 - Manual (Page 6)

6
The machine must not be plugged in and the power switch must be in the OFF position
until assembly is complete.
Getting to Know Your Air Filtration System
Assembly
1
Item Description
1 Diffuser
2 Primary Filter
3 Secondary Filter
4 Access Panel
5 Switch Location
6 Joist Hooks (x4)
7 Eye Bolts (x4)
8 Rubber Feet (x4)
Unpacking and Clean-up
1. Carefully finish removing all contents from shipping carton. Compare contents of the
shipping carton with the list of contents above. Place parts on a protected surface.
2. Report any shipping damage to your local distributor.
3. Clean all rust protected surfaces. Do not use; gasoline, paint thinner, mineral spirits,
etc. These may damage painted surfaces.
4. Set packing material and shipping carton to the side. Do not discard until machine
has been set up and is running properly.
Tools Required for Assembly
Item Description
#2 Phillips Screwdriver
10mm Wrench
2
3
4
6 7
8
5