Seca 220 - Manual (Page 11)

Before you really get started… • 11
English
Attaching measuring
rod to spacer
CAUTION!
False measurement results
No proper measurement results will be possible
if the mounting position selected is not suitable
for your column scale.
 Make sure to select the correct mounting po-
sition for your column scale (see “Selecting
the mounting position” on page 9.)
1. Pull the upper telescopic element out to the 155 cm
mark.
The holes in the lower telescopic element are expo-
sed.
2. Adjust the measuring rod as provided for your mo-
del of scale (here: position for models seca 709 und
seca 710 ).
3. Position the measuring rod on the spacer at the
height provided for your model of scale (here: posi-
tion for models
seca 709 und seca 710 ).
4. Check that the guide pins of the spacer are inserted
in the guide holes of the measuring rod.
5. Screw the measuring rod to the spacer.
6. Check the position of the measuring rod (see “Ve-
rifying position of measuring rod” on page 12).
155 cm